Product Description
Bartolini 59CBJD1 5-String Classic Dual Coil J Bass V pickup set
FREE shipping anywhere in the USA!
Full and warm deep vintage tone - Dual inline-coil hum-cancelling Jazz bass upgrade pickups in Standard 5-string size.
The original Bartolini design gives you the timeless tone that started it all – full and warm for that vintage voice you’ve been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don’t have to worry about string alignment. Original Barts bring out your voice, low and clear.
In the early ‘70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate “microphonics” – the nasty noise you get when you touch typical pickups.
Available in balanced specific bridge and neck versions.
Additional Information
Opposite polarity for bass and treble coils for neck and bridge pickups
- DC Resistance: ~6.7KΩ
- Resonant Frequency: ~5.7KHz
- Sensing Width: 2.83" [72mm] Max 2.32" [59mm] Min
Bridge Specs:
- DC Resistance: ~7.4KΩ
- Resonant Frequency: ~4.9KHz
- Sensing Width: 2.95" [75mm] Max 2.36" [60mm] Min
Neck Size:
- 3.6" [91.4mm] Long,
- 0.73" [18.5mm] Wide,
- 0.83" [21.1mm] Thick + 0.11" [2.8mm] Cable
- 4 Standard J Pickup Mounting ears for your #3 or #4 screws
Bridge Size:
- 3.73" [94.7mm] Long,
- 0.73" [18.5mm] Wide,
- 0.83" [21.1mm] Thick + 0.11" [2.8mm] Cable
- 4 Standard J Pickup Mounting ears for your #3 or #4 screws